Engineering Specifications
Model # |
Drying Length |
Drying Width |
Zones |
Capacity |
Pilot Line * |
5 |
3,000 kg/month |
RZD 820 |
20 |
8 |
8 |
Depends on product |
RZD 840 |
40 |
8 |
12 |
RZD 880 |
80 |
8 |
18 |
RZD 8100 |
100 |
8 |
20 |
RZD 10100 |
100 |
10 |
20 |
up to 2 metric ton/ 8 hour shift |
Options
Automatic belt tracking
Edge heaters
HVAC equipment
HVAC Installation
Electrical Installation
Utilities
90 – 95% energy efficiency
600 VAC, 3 phase
please inquire for amperage rating
Natural Gas
Gas fired system also available
HVAC
Backward incline blower capacity per 20’ drying tunnel length
Wheel Diameter: 18 ¼”
Motor: 3 hp, 1765 RPM
CFM rating at 0.25”SP / 3.00” SP: 6,400 CFM / 4,200 CFM
Water
Water is required for the belt washers (2). The spray systems utilize a loop of recycled water. If the belt is relatively clean after product removal, water required is minimal.
Clean belt operation: 0 – 0.2 gpm
Washdown belt operation: 0.2 – 1 gpm
Vacuum
Vacuum is required at the product removal area for the Top Belt Washer Vacuum Bar, the Bottom Belt Washer Vacuum Bar, and the Product Removal Nose Vacuum Bar.
100 CFM @ 100” Static Pressure for three 2” connections.
Compressed Air
Maximum 100 psi for belt tension and nip roller tension. |
